model ranges important features frequency response applications
FA201 Single Axis DC response Accelerometer FA201
Motorsports Racing, Structural
Monitoring
±2 g to ±50 g
  • Low Noise
  • 2 Pole Electronic Filtering
  • High Over-Range Protection
  • Low Current Consumption
  • Temperature Compensation
100Hz cut-off
(-3dB)
Up to 400Hz natural frequency
Motorsports, Seismic,
Vibration Monitoring, Shock Monitoring
FA3700 Single Axis DC response Accelerometer FA3700
Shock testing, low profile,
stainless steel
±50 g to ±6000 g
  • DC Response
  • 20,000g Shock Protection
  • No Zero Shift
  • Rugged PFA Jacketed Cable
  • mV Output
  • Stainless Steel Housing
Up to 6000Hz,
depending on range
Impact Testing, Structural Testing,
Transient Shock Testing
FA3801A Single Axis DC response Accelerometer FA3801A
Detachable cable, screw
mount, stainless steel
±2 g to ±2000 g
  • 10,000g Shock Protection
  • Hermetically Sealed Sensor
  • Gas Damping
  • mV Output
  • DC Response
  • Stud Mounting
Up to 5000Hz,
depending on range
Impact Testing, Structural Testing,
Test & Instrumentation,
Environmental Testing
FA4000A Single Axis DC response Accelerometer FA4000A/FA4001A
Low cost, amplified and signal
conditioned
±2 g to ±200 g
  • Low Cost
  • Silicon MEMS Accelerometer
  • Signal Conditioned Output
  • Temperature Calibrated
  • High Over-Range Protection
  • Gas Damping
Up to 1500Hz,
depending on range
Low Frequency Monitoring,
Transportation, Vibration Sensing,
Test & Instrumentation, Machine
Control, Motion Analysis
FA4201 Single Axis DC response Accelerometer FA4201
High Performance
±6 g to ±50 g
  • Measures static & dynamic acceleration
  • Over shock protection to ±5,000 g’s
  • Operating temperature from -40 to 125°C
  • Built-in 8-pole low-pass filter
  • EMI/RFI protection
  • Transverse sensitivity <1% available
See datasheet Formula One, Indy Racing League,
NASCAR, Test and Measurement
FA4600 Single Axis DC response Accelerometer FA4600/FA4602
Advanced temp compensation,
low profile
±2 g to ±500 g
  • MEMS DC Accelerometer
  • Amplified, Signal Conditioned
  • Integral Strain Relief
  • DC to 2000Hz Bandwidth
  • -55° to +125°C Operating Range
  • Gas Damped MEMS Element
Up to 2000Hz,
depending on range
Flight Testing, Flutter and Nacelle
Vibrations, Road Vehicle Testing,
Structural Testing, Test and
Instrumentation, Performance
Testing
FA4604 Single Axis DC response Accelerometer FA4604
Robust strain relief & cable,
amplified output
±2 g to ±500 g
  • MEMS DC Response Accelerometer
  • High Sensitivity, Low Noise
  • Robust Strain Relief and Cable
  • -55° to +125°C Operating Range
  • Gas Damped MEMS Elements
Up to 2000Hz,
depending on range
Flight Testing, Flutter and Nacelle
Vibrations, Road Vehicle Testing,
Structural Testing, Test and
Instrumentation, Transportation
FA4605 Single Axis DC response Accelerometer FA4605
Detachable cable, low profile
±2 g to ±500 g
  • Amplified Output
  • Lower Power Consumption
  • Gas Damped, MEMS Accelerometer
  • High Sensitivity
  • Integral Connector
  • DC, Low Frequency Response
Up to 2000Hz,
depending on range
Flight testing, Flutter and Nacelle
vibrations, Structural testing, Test
and Instrumentation, Performance
testing, Transportation
FA4610 Single Axis DC response Accelerometer FA4610
Amplified and signal
conditioned, integral cable
±2 g to ±500 g
  • High Performance DC Response
  • Low Noise, Signal Conditioned Output
  • Advanced Temperature Compensation
  • 10,000g Over-Range Protection
  • Hermetically Sealed Sensor
  • Gas Damping
Up to 2000Hz,
depending on range
Low Frequency Monitoring,
Transportation, Flight Testing, Test
& Instrumentation, Modal Analysis,
Machine Control, Road Vechicle
Testing, Motion Analysis, Tilt,
Trains
FA4623 Single Axis DC response Accelerometer FA4623
EMI protection, rugged
strain relief
±2 g to ±500 g
  • Signal Conditioned Output
  • EMI/EMC Protection Circuit
  • Gas Damping
  • Integral Strain Relief
  • DC, Low Frequency Response
  • High Sensitivity MEMS Accelerometer
Up to 1000Hz,
depending on range
Harsh applications, Structural
testing, Test and Instrumentation,
Performance testing,
Transportation, Flight testing
FA4801A Single Axis DC response Accelerometer FA4801A
Detachable cable, stud mount,
stainless steel
±2 g to ±500 g
  • Amplified, Signal Conditioned
  • Hermetically Sealed
  • Detachable Cable
  • 10,000g Shock Protection
  • Gas Damped MEMS Element
  • Stud Mounting
Up to 1800Hz,
depending on range
Vehicle Testing, Transportation
Measurements, Structural Testing,
Test & Instrumentation,
Environmental Testing
FA4810A Single Axis DC response Accelerometer FA4810A
Welded stainless steel,
detachable cable
±2 g to ±500 g
  • High Performance, DC Response
  • Amplified and Signal Conditioned Output
  • Hermetically Sealed
  • Gas Damped MEMS Element
  • Detachable Cable
  • Advanced Temperature Compensation
Up to 1500Hz,
depending on range
Low Frequency Monitoring,
Transportation, Flight Testing,
Machine Control, Road Vehicle
Testing, Trains
FA61 Single Axis DC response Accelerometer FA61
Stud mount, rugged package,
integral cable
±750 g to ±2000 g
  • DC Response
  • Durable Cable
  • Small Package
  • Reliable Performance
  • <±25 mV Zero Offset
  • 1% Transverse Sensitivity Available
Up to 5000Hz,
depending on range
In-Dummy: Head, Thorax, Pelvic
FAEGAS miniature acceleration sensor FAEGAS
Small size, integral cable, oil
damped
5 g to 2.500 g
  • Miniature Design
  • 10,000 g Overrange Stops
  • Small Size, Weighs < 1 gram
  • Static and Dynamic Measurement
  • 2% Transverse Sensitivity
  • Damping Ratio 0.7
Up to 3500Hz,
depending on range
Sports and Recreation, Modeling,
Biodynamics, Entertainment
FAEGAX/FAEGAXT miniature acceleration sensor FAEGAX / FAEGAXT
Miniature size, over-range
protection, oil damped
±5 g to ±2.500 g
  • Miniature Design
  • 10,000 g Overrange Stops
  • Small Size, Low Weight
  • Static and Dynamic Measurement
  • -40°C to +120°C Operating Temperature Range
  • 10,000 g Overrange Protection
Up to 3000Hz,
depending on range
Flight Test & Control, Launch,
Robotics, Space Flight, Shock
Testing
FAEGCS-A2/B2 miniature acceleration sensor FAEGCS-A2/B2
Amplified output, rugged, oil
damped
±5 g to ±5000 g
  • Miniature Design, Heavy Duty
  • DC Response
  • 10,000 g Overrange Stops
  • Static and Dynamic Measurement
  • -40°C to +120°C Operating Temperature Range
Up to 4000Hz,
depending on range
Blast Testing, Machine Control,
Downhole, Engine Testing
FAEGCS-D0 miniature acceleration sensor FAEGCS-D0
Screw mount, stainless steel,
oil damped
5 g to 5.000 g
  • Rugged Design
  • DC Response
  • 10,000 g Overange Stops
  • Static and Dynamic Measurement
  • -40°C to +120°C Operating Temperature Range
Up to 4000Hz,
depending on range
General Purpose, Machine Control,
Inspection, Engine Testing
FAEGCS-D1S Single Axis DC response Accelerometer FAEGCS-D1S
Stud mount, stainless steel, oil
damped
5 g to 5.000 g
  • Rugged Design
  • DC Response
  • 10,000 g Overange Stops
  • Broad Temperature Range
  • Static and Dynamic Measurement
  • -40°C to +120°C Operating Temperature Range
Up to 4000Hz,
depending on range
General Purpose, Machine Control,
Inspection, Engine Testing