These transducers are used to conduct experiments on or pursue research for general buildings, bridges, ground, tunnels, dams and other civil engineering structures. They measure concrete strain, soil pressure, water pressure, stress displacement, inclination and other various physical quantities and convert them electrically. With the use of data loggers it is possible to build an automated multi-point measurement system that operates unattended to gather data for a long time.
Inner/Surface Strain Transducer | Crack/Creep Displacement | Water level | Inclination | Loading Force | Soil/Pore Pressure | Temperature gauges
Inner/Surface Strain Transducer
| type | capacity | rated output (mV/V) |
non-linearity (%RO) |
feature | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Embedment Strain Gauge |
|
|
|
|
Concrete inner strain and Steel surface strain measurements KM-AT/-BT: Thermocouple integrated |
||||||||
| Reinforcing-bar Meter |
KSA-A KSAT-A |
300N/mm2 | 2.2 | 1 | Axial stress measurement of reinforcing-bar KSAT-A : Thermocouple integrated |
Crack/Creep Displacement
| type | capacity | rated output (mV/V) |
non-linearity (%RO) |
feature | |||||
|---|---|---|---|---|---|---|---|---|---|
| Joint meter |
KJA-A KJB-A |
5,10,20,50mm | 1 | 1.5 | Opening displacement measurement at joint of mass concrete KJA-A : Embedded in the concrete KJB-A : Installed on the surface of concrete |
||||
| Shear displacement Transducer |
KU-A | ±2.5mm | 2.5 | 0.3 | Shear displacement measurement at joint of mass concrete | ||||
| Crack displacement transducer |
KG-A |
|
|
1 | Crack opening measurement on concrete construction KG-B:Bi-axial measurement |
||||
| Crack displacement transducer |
KG-B | X-direction +4,-2mm Y-direction ±3mm |
X-direction +2,-1 Y-direction ±1.5 |
1 | |||||
| Commpresso meter |
CM | - | - | - | Measurement of axial strain of concrete test piece CM-H : Usable until breaking of test piece |
||||
| Commpresso meter (destructive) |
CM-H | - | - | - | |||||
| Micro-creep meter |
KH-A | 5mm | 3.8 | 0.3 | Displacement measurement between two points separated by 1 to 10m | ||||
| Water level transducer |
KW-C | 10m 20m |
1 | 0.5 | Level measurement of underground water | ||||
| Water-pressure type displacement transducer |
KWL-B |
|
|
0.3 | Flexibility measurement of bridge and settling of structures | ||||
| Water-pressure type displacement transducer |
KWL-C | 200mm | 2.5 | 0.5 | |||||
| Ground extension gauge |
KLG-A | 200mm | 2.5 | 1 | Movement measurement in landslide of the ground | ||||
| Ground extension gauge |
KLG-B | 50,100mm | 2.5 | 1 | - | ||||
| Settlement transducer |
KLA-A | 100mm | 2.5 | 1 | Sinkage measurement in underground multiple layers | ||||
| Rock displacement transducer |
KLB-A | 100mm | 2.5 | 1 | Measurement of displacement between the surface and a number of layers in a rock bed |
Inclination
| type | capacity | rated output (mV/V) |
non-linearity (%RO) |
feature | |||||
|---|---|---|---|---|---|---|---|---|---|
| Stanchion type Inclinometer ![]() |
KB-AB KB-AC |
±1,2,5° | 1 | 0.5 | Inclination measurement of general construction Bi-axial measurement for KB-AC |
||||
| Shock-resistive Inclinometer ![]() |
KB-B |
|
|
1 | Inclination measurement on structures subjected to shock as well as on pile driving, perpendicular excavations etc. | ||||
| Small Size Inclinometer ![]() |
KB-D KB-E |
±5° ±10° |
1 | 0.5 | Inclination measurement of general construction Bi-axial measurement for KB-E |
||||
| Multi-layer type Inclinometer ![]() |
|
±5° ±10° |
|
0.5 | Land slide and retaining wall displacement measurements, Maximum connection :15 levels for KB-JB, KB-KB and KB-KD 31 levels for KB-JC and KB-KC Bi-axial measurement for KB-KB, KB-KC and KB-KD |
||||
Network multi-layer Inclinometer![]() |
NKB-LC NKB-MC |
±5° ±10° |
- | 0.5 | Landslide and retaining wall displacement measurements Electrically connected to TML-NET system for measurement |
||||
Embedment type Inclinometer![]() |
KB-P | ±5° ±10° |
1 | 1 | Landslide and retaining wall displacement measurements | ||||
| Insertion type Inclinometer ![]() |
KB-GC KB-HC |
±5° ±10° |
1 | 0.5 | Landslide and retaining wall displacement measurements Bi-axial measurement for KB-HC |
Loading Force
| type | capacity | rated output (mV/V) |
non-linearity (%RO) |
feature | |
|---|---|---|---|---|---|
| Flat-bed Load Cell |
CLL-NA | 500,750kN 1MN |
1.5 | 0.2 | Load measurement of concrete test piece High range compression |
| CLH-NA | 1,1.5,2MN | 1.5 | 0.2 | ||
| Center hole compression load Cell |
KCE-NA | 500kN,1 1.5,2MN |
1.25 | 1 | Center-hole compression |
| KCM-NA | 50,100,200, 300,500kN, 1,2,3,5MN |
1.5 | 1 | ||
| CLC-NA | 50,100,200, 300,500kN, 1, 2,3,5MN |
1.5 | 0.5 | ||
| KCC-NA | 200,500kN 1MN |
1 | 1 | ||
| Rock Bolt Axial Force Transducer |
KRA-A | 100kN | 1.7 | 1 | Axial force measurement of rock bolt |
Soil/Pore Pressure
| type | capacity | rated output (mV/V) |
non-linearity (%RO) |
feature | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pore Pressure Transducer |
KPA-PA KPB-PA |
|
|
|
Pore-water pressure measurement in the ground,boring holes etc Outer diameter KPA,KPB : Ø40mm KPC,KPD : Ø30mm |
||||||
| KPC-PA KPD-PA |
|
|
|
||||||||
| Soil Pressure Gauge |
KDA-PA KDB-PA KDC-PA KDD-PA |
|
|
|
Soil pressure measurement in retaining wall,ground etc. Outer diameter KDA,KDB : Ø200mm KDC,KDD : Ø100mm KDE,KDF: Ø50mm |
||||||
| KDE-PA KDF-PA |
|
|
2 | ||||||||
| Load cell type Soil pressure gauge |
KDG-PA KDH-PA KDJ-PA |
KDK-PA 200,500kPa 1,2MPa |
1 | 1 | Soil pressure measurement in ground etc. Less sensitive to side pressure and durable |
||||||
| Miniature pressure gauge |
PDA-PA PDB-PA |
200kPa | 0.8 | 1 | Usable for underwater measurement Outer diameter Ø6.5mm |
||||||
| 500kPa 1MPa |
1 |
Temperature gauges
| type | capacity | rated output (mV/V) |
non-linearity (%RO) |
feature | |
|---|---|---|---|---|---|
| Temperature gauge |
TK-F | -20 to +80°C | - | - | Temperature measurement of concrete or underground |
| Temperature gauge |
T/K | - | - | - |






