E30/E31 - E30H/E31H
Round flanged encoder: body Ø 30 mm, shaft Ø 4 mm
Supply 5Vdc or 8/24Vdc, output signals: push-pull, NPN open collector, 5V line driver
Protection against short circuits, PPR no: 5 to 10.000
E40/E41 - E40H/E41H
Round flanged encoder: body Ø 40 mm, shaft Ø 6mm
Supply 5Vdc or 8/24Vdc, output signals: push-pull, NPN open collector, 5V line driver
Protection against short circuits, PPR no: 5 to 10.000
E320/E321 - E320V/E321V
Series E320/321: Round flangeØ 38 mm 4 holes M3 on Ø 30 mm
Series E320V/321V: Round flange Ø 38 mm, screw fixing M18 x 1
Shaft Ø 6 mm, PPR no.: 2 to 1024
SE/SEB/SEB-Z
Round flange 50 mm diameter, shaft diameter 10 mm
Voltage supply 10/24 or 5 Vdc
Max counting frequency 100 KHz
Protection against short circuit, Number of PPR: 2 to 1024
E520/E521 - RE520/RE521 - RE530/RE531
Series E520/E521: Servo coupling diameter 58 mm, shaft Ø 6 or 8 or 10 mm
Series RE530/RE531: flange RE0444, shaft Ø 11 mm 9.52 or 10 mm
Plastic case (series E) or metal case (series RE), Number of PPR: 2 to 36000
E540/E541 - RE540/RE541
Series E540/E541: Round flange Ø 58 mm with centering mask Ø 36, 3 M4 holes at 120° on Ø 48
Shaft Ø 8 mm or 6 mm or 10 mm
Plastic case (series E) or metal case (series RE), Number of PPR: 2 to 36000
E620/E621- RE620/RE621- E650/E651 - RE650/RE651
Series E620/E621: Square flange 63.5x63.5 mm, centering mask Ø 31.75 mm
Series E650/E651: Square flange 63.5x63.5 mm, centering mask Ø 50 mm
Shaft Ø 6, 8, 9.52 or 10 mm, Plastic case (series E) or metal case (series RE), Number of PPR: 2 to 36000
E400 - E410 - E430 - E470
Hollow shaft, Pulses per revolution: 2 ÷ 36000.
E400 - Joint for motor coupling /
Ø 53.5 mm flange,
E470 - Joint for motor coupling /
Ø 72 mm flange
E410 - Hollow shaft for motor coupling,
E430 - Hollow shaft for motor coupling
Fixing by elastic support
Programmable EP/REP
Pulses/revolution no. programmable via PC, Pulses/revolution no.: 8 to 2048
Supply 5/28Vdc, Output signals: push-pull or line driver
Different mechanical versions available
EM (Magnetic incremental encoders)
Supply 5Vdc or 10/24Vdc or 5/24Vdc, Output signals: push-pull or line driver
Pulses/revolution no.: 8 to 2048
Several mechanical versions available
| model no. | diameter (mm) |
resolution | power supply | extra information | |
|---|---|---|---|---|---|
| Shaft incremental encoder | |||||
 |
TI25 Family | 4 mm [shaft] |
10, 15 PPR | 5V, 11/30V | Encoder size 25 mm Atex -, Profibus -, TUV certificate |
 |
TK15, TK38 Family | 5-6 mm [shaft] |
up to 3600 PPR | 5V, 11/30V, 24/5V | Encoder size 38 mm |
 |
TK20 Family | 6 mm [shaft] |
up to 3600 PPR | 5V, 11/30V | Encoder size 44 mm |
 |
TK25 Family | 6 mm [shaft] |
up to 1440 PPR | 5V, 11/30V, 24/5V | Encoder size 44 mm |
 |
TK40 Family | 6, 8, 9.52, 10 mm [shaft] |
up to 3600 PPR | 5V, 11/30V, 24/5V | Encoder size 63.5 mm Square Flange 63.5 mm |
 |
TK45 Family | 6, 8, 9.52, 10 mm [shaft] |
up to 2700 PPR | 5V, 11/30V, 24/5V | Encoder size 63.5 mm |
 |
TK50 Family | 6, 8, 9.52, 10, 11, 11R mm [shaft] |
up to 9000 PPR | 5V, 11/30V, 24/5V | Encoder size 63.5 mm Square Flange, S, SG and FRE (REO444) |
 |
TS58 Family | 6, 8, 9.52, 10, 11,11R mm [shaft] |
up to 2048 PPR | 5V, 5/28V, 11/30V, 24/5V | Encoder size 58 mm Square Flange, S, SG and FRE (REO444) |
 |
TK60 Family | 6, 8, 10 mm [shaft] |
up to 9000 PPR | 5V, 11/30V, 24/5V | Encoder size 63.5 mm, 60 mm (H) Flange SG and H |
 |
TK90 Family | 6, 8, 9.52, 10, 11,12 mm [shaft] |
up to 10000 PPR | 5V, 11/30V, 24/5V | Encoder size 80 mm Flange S |
 |
TK100 Family | 6, 8, 9.52, 10, 11,11R mm [shaft] |
up to 10000 PPR | 5V, 11/30V, 24/5V | Encoder size 80 mm Flange F, SG, FRE (REO444) |
 |
TIW28 Family (Hollow shaft) |
5 mm (deep 15 mm max) [shaft] |
up to 1024 PPR | 5V, 11/30V, 24/5V | Encoder size 38 mm, height 28 mm |
 |
TIW38 Family (Hollow shaft) |
6,8 mm (deep 15 mm max) [shaft] |
up to 1024 PPR | 5V, 11/30V, 24/5V | Encoder size 38 mm, height 40 mm |
 |
TKW315, TKW315C Family (Hollow shaft) |
6,8 mm (deep 15 mm max) [shaft] |
up to 3600 PPR | 5V, 11/30V, 24/5V | Encoder size 38 mm, height 40 mm |
 |
TKW25 Family (Hollow shaft) |
6 mm (deep 14 mm max) [shaft] |
up to 1250 PPR | 5V, 11/30V, 24/5V | Encoder size 44 mm, height 48 mm |
 |
TIW615 Family (Hollow shaft) |
8,9.52,10,12,15 mm (prof. 25 mm max) [shaft] |
up to 3600 PPR | 5V, 11/30V, 24/5V | Encoder size 63.5mm, height 40 mm |
 |
TKW615, TKW615C Family (Hollow shaft) |
6,8,10,12,15 mm (prof. 25 mm max) [shaft] |
up to 3600 PPR | 5V, 11/30V, 24/5V | Encoder size 62 mm, height 40 mm |
|
TIHT38 Family (Through hole) |
6 mm [shaft] |
up to 1024 PPR | 5V, 11/30V, 24/5V | Encoder size 38 mm, height 42.2 mm |
 |
TKW615HT Family (Through hole) |
8,10,12.7 mm [shaft] |
up to 3600PPR | 5V, 11/30V, 24/5V | Encoder size 63.5 mm, height 60 mm |
 |
TI58HS Family (Through hole) |
8,10,11,12,15 mm [shaft] |
up to 2048 PPR | 5V, 11/30V | Encoder size 58 mm, height 45 mm Temperature: 100 °C (max) |
 |
TSSO Family (Through hole) with Hall output signal for BLDC Motors |
6 mm [shaft] |
up to 1024 PPR | 5V | Encoder size 48 mm, height 28 mm Temperature: 105 °C (max) Output circuits: LD, PP Hall signal: 4,6,8 poles |
 |
TSW80 Family (Through hole) with Hall output signal for BLDC Motors |
up to 44 mm [shaft] |
up to 1024 PPR | 5V, 5÷24V | Encoder size 48 mm, height 28 mm Temperature: 105 °C (max) Output circuits: LD, LD2, PP2 Hall signal: 4,6,8 poles |
| model no. | diameter (mm) |
resolution | power supply | extra information | |
|---|---|---|---|---|---|
| Specials | |||||
 |
TKM38 Family (hollow shaft) Incremental encoder with mounting bell |
8,10 mm [shaft] |
up to 3600 PPR | 5V, 11/30V, 24/5V | Encoder size: 74, 48, 46 mm |
 |
TKM73 Family (hollow shaft) Incremental encoder with mounting bell |
6,8,9.52,10 mm [shaft] |
up to 3600 PPR | 5V, 11/30V, 24/5V | Encoder size: 72 mm |
 |
TDT40 Family Incremental encoder with speedometer dynamo |
? | up to 2700 PPR | 5V, 11/30V, 24/5V | Square flange: 63.5 mm Voltage: 20V @ 1000RPM (Imax 20mA) Maximum current: 20 mA |
 |
TDT50 Family Incremental encoder with speedometer dynamo |
10 mm [shaft] |
up to 9000 PPR | 5V, 11/30V, 24/5V | Square flange: 63.5 mm Voltage: 20 V @ 1000 RPM Maximum current: 20 mA |
 |
TDT100 Family Incremental encoder with speedometer dynamo |
11 mm [shaft] |
up to 10000 PPR | 5V, 11/30V, 24/5V | REO 444 flange Voltage: 60 V @ 1000 RPM (I = 5 mA) Maximum current: 70 mA |
 |
TKW615REO Family Incremental encoder with speedometer dynamo |
11 mm [shaft] |
up to 10000 PPR | 5V, 11/30V, 24/5V | REO 444 flange Voltage: 60 V @ 1000 RPM Maximum current: 100 mA @ 6000 RPM |
 |
TRC100 Family Incremental encoder with centrifugal relay |
11 mm [shaft] |
up to 10000 PPR | 5V, 11/30V, 24/5V | Setting speed: 780 - 6000 RPM |
 |
RM200 Family Incremental encoder with metric wheels |
200 mm [circumference] |
up to 3600 PPR | 5V, 11/30V, 24/5V | -- |
 |
RM500 Family Incremental encoder with metric wheels |
500 mm [circumference] |
up to 2500 PPR | 5V, 11/30V, 24/5V | -- |
 |
TKEB Family Incremental encoder for weighing heads |
63.5 mm [housing] |
up to 9000 PPR | 5V, 11/30V, 24/5V | -- |
 |
BICODER Incremental + incremental Incremental + absolute |
63.5 mm [housing] |
up to 9000 PPR / 2048 CPR | 5V, 11/30V, 24/5V | Encoder with double resolution/output |